Messmers UV Plus Wood Stain has been manufactured for over 20 years in the Salt Lake City, Utah area. Using a combination of natural oils (linseed) and synthetic oils, Messmers will protect exterior wood with 8 different transparent and semi-transparent colors. The trans-oxides will absorb the UV while preventing oxidation/graying.
Update: Messmers UV Plus Wood Stain
We would love to hear from you if you have used Messmers UV Plus Wood Stain on your wood or deck. Please post a rating in the Consumer Star Ratings below.
If you have any pictures of your experience with Messmers UV Plus Wood Stains, you can add them in the comment area with a detailed description.
Messmers UV Plus Wood Stain Scores (1-10)
Appearance After Initial Stain Application: 8
– We choose the Natural color as the manufacturer said it was the most popular. It enhanced the wood grain “naturally” without adding to much pigment or “orange” tones to our redwood decking. The knots of the redwood did dry a little lighter in color compared to the rich tones of the grain.
Preventing UV Graying at 2 Year Mark: 7
– Messmers scored lowest in preventing UV graying. About 60% of the original color was left after the 2 plus years. The decking surface was just starting to turn gray. Being that the Natural color we used was light in tint, we would assume that a darker color/tint would achieve better results for UV protection.
Wear/Tear and Peeling: 9
– The UV Plus did excellent for wear/tear. This finished absorbed deeply into the wood grain. A small number of worn areas were noticeable around the perimeter of the home from water dripping along the roof edge.